Filter
Top Products
34
Recording
Programming a recording (REC MENU) (Continued)
Optional settings on REC MENU
The following setting options are available for each timer programme. Follow steps 1) to 3).
1) Select a desired one (1 - 9) using
/ / / , then press ENTER.
A sub menu (or keyboard) appears.
2) Make the setting.
Refer to the descriptions below.
3) Finally select “Set timer” using
/ / / , then press ENTER.
The settings are saved.
10/23(Su)17:50
Basic
REC
MENU
Ch Date
Rec folder
Rec time –h––m/ HDD remaining (excluding above) 51h 24m
Genre
Start End Media Pict. Audio
1SP4.6 D/M110/30(Su) 7 00 8 30
HDD
DVD mode
Edit title name Advanced Cancel Set timer
ROOT
No genre
On(l)
Quality rate spc sv
Off
Off
10/23(Su)17:50
Advanced
REC
MENU
Basic Set timer
Auto chp div if no s
PDC
Off
Ratio for DVD-Video
4:3
Off
DVD-Video chp div
1 2 3
4 5 6
SLOW/REV FWD/SLOW
PLAY
STOP
SKIP REV SKIP FWD
or
ENTER
1
2
3
4
Switches by
either way.
7
To cancel the current
timer prrogramme.
5
6
8
9
1Rec folder
To select a folder into which the programme is
saved.
Available folders appear. Select one from them.
• For the folder function, see
page 50.
2Genre
To select a genre of the programme.
Available genres appear. Select one from them.
• For genres, see
page 124.
3DVD mode
Make this setting when this timer programme is
(or will be) onto DVD-R/RW (Video mode).
Off / On(l) / On(ll)
See
page 28.
4Edit title name
To enter a name of the timer programme.
A keyboard appears.
• For keyboard operation, see
page 128.
5Quality rate spc sv
Use this feature when you want to save space
while using the best picture quality rate for
recording. This will use 9.2 Mbps for recording
and reduce the rate temporarily for the portion
where the high rate is not required where picture
is fairly constant.
Off: This feature is disabled and the normal
recording is performed.
On: This feature is enabled.
Notes
• When the audio quality is set to “L-PCM”, the picture
quality is set to “MN 8.0 (Mbps)”. When the audio
quality is set to any other selection, the picture
quality is set to “MN 9.2 (Mbps)”.
• “On” returns to “Off” if you change “Pict.” setting.
• The space used may not change, depending on the
picture contents.
RD-XS24SB_Ope_E_p025-036 8/31/05, 11:52 PM34