Toshiba RD-XS24SB DVD Recorder User Manual


 
55
Editing
Others
Introduction
Function setup
Recording
Playback
Using “LOCK”
“LOCK” is the function to protect the titles. The titles in
“LOCK” cannot be deleted or played by others who do
not know the security code.
“LOCK” is the only folder as well as “GARBAGE”. You
cannot duplicate or rename it either.
To use this function, you need to select “On” in the
following setting in advance.
Setting of “LOCK”
1) During stop, press SETUP. (Open the lid of the
remote control.)
2) Press
/ to select “Management settings”,
then press ENTER.
3) Press
/ to select “Security folder setting”,
then press ENTER.
4) Press
/ to select, then press ENTER.
Off:
Deactivates this function.
On “show”:
Activates this function.
“LOCK” is not displayed on the ROOT. You need to
input the security code to plat the title.
On “hide”:
Activates this function. “LOCK” is not displayed on
the ROOT. The operations such as playback or
deletion cannot be performed.
4) Input the four-digit security code by pressing
number buttons, then press ENTER.
To input digits, set the OPERATION/NUMBER
switch to “NUMBER”.
If you inputted wrong number, press the CLEAR
button to input again before pressing the ENTER
button.
If you forget the security code or you want to cancel
it, press the STOP button 4 times, then press the
ENTER button.
Notes
It you change the setting from “On (show)” or “On (hide)” to
“Off”, all the titles which are in “LOCK” will move onto the
ROOT.
Even though parts of a Playlist are in “LOCK”, the Playlist
can be played.
Operating “LOCK”
“LOCK” changes its status as follows;
Locked:
“Title List” is displayed.
To play the title, you need to
input the security code (or open
the Quick Menu while selecting
this folder, and select “Folder
function” then “Unlock security
folder”.
Unlocked:
The Title List can be displayed.
You can select and play (same
as normal folders).
To lock the folder:
1) While selecting “LOCK”, press QUICK
MENU.
2) Press
/ to select “Folder function”,
then press ENTER.
3) Press
/ to select “Lock security
folder”, then press ENTER.
The icon changes to the locked form.
Note
•Turning on the recorder locks the unlocked folder.
Invisible:
The folder is not displayed.
Selecting a title is impossible,
therefore operation is
unavailable.
Input important titles into
“LOCK”, and set to “On (hide)”.
The titles are protected from
operations by others.
Notes
All titles in “LOCK” will be deleted automatically by
executing “All HDD titles delete”.
If you execute “All HDD titles delete”, the security code will
be cancelled.
HDD
RD-XS24SB_Ope_E_p049-059 8/31/05, 11:55 PM55