Toshiba XVR16-120-X DVR User Manual


 
112
Connecting a Network Device
1. Open Camera Setup. Setup > Camera Setup
2. Select the camera channel to add a Network Device to.
3. Check the Use Network Device Box.
4. If the Network Device supports PTZ check the Enable Network
Device PTZ Box.
5. Click Setup Network Device and the Network Device Properties
Window will appear.
6. Click Setup to add a Network Device.
7. Select the Manufacturer (Class) and Model of camera being added
then click Next.
8. Enter the IP Address, Port, ID, and Password of the Network Device
and click Finish.
9. Click OK when returned to the main Network Device Propertied
Window and click OK to exit the main setup window.
10. The Network Device has been added.