Toshiba XVR16-120-X DVR User Manual


 
48
Volume
The volume control allows fine tuning of the volume settings on the XVR.
Volume Options:
Slider Controls – Used to adjust the literal volume for the
respective devices listed.
Mute Checkbox – Check the mute box to mute volume on
any of the device columns or check the Mute All checkbox to
mute all volume on the XVR.
Auto Sequencing Setting
Auto Sequencing is used either in the main screen when Auto Sequencing has been enabled or when a Spot-Monitor out signal is
used to display on a spot monitor. Auto Sequencing conveniently displays video channels and at specified intervals, sequences
through each selected channel.
1 Division Tabs These three tabs present the various division options for Auto Sequencing.
Ex: 4 division creates a quad-display.
2 Channel Selection Click each channel to include in Auto Sequencing.
3 Select All Clicking this button causes all channels to be included in Auto Sequencing.
4 Auto Sequencing settings This area allows users to define settings for Auto Sequencing. Custom Mode allows users
to define non-standard divisions. Skip 0 FPS Channel causes cameras with no video
signal to be skipped. The Interval Menu allows users to select the interval (in seconds)
between switching Cameras.
5 Division selections Each Division Section allows the user to define which cameras will be included in the
sequence. Check individual Cameras to include in the Auto Sequence.