Toshiba XVR16-120-X DVR User Manual


 
37
Frame Setup (16 Channel)
1 Video Format Displays the Video Format (NTSC/PAL).
2 Camera Number Adjust the recorded Pictures Per Second by sliding the bar to the left and right.
3 Number of Frames Displays the number of frames that are selected for each camera.
4 Set Default Resets all camera settings to their default values.
5 Frame Select Adjusts the frames for each camera. The blue slider designates the number of pictures a
second that can be captured by the selected camera, while the red slider designates how
many pictures can be recorded by the designated camera.
6 Resolution Displays the available Resolution options. The same resolution will be used for all
cameras.
7 Quality This setting affects the quality of the video. Increasing the quality of the camera can
reduce the amount of pixilation within the image considerably, but also increases the file
size.
8 Sensitivity The sensitivity adjusts the rate at which the Keyframe refreshes. This option directly
affects the codec used to record the video. Adjusting this setting can have drastic
negative effects on the quality of the video. It is highly recommended that this setting be
left at the default setting unless so instructed by a system administrator.
9 Video Out Enables video from selected cameras to be viewed on spot monitor display.
10 Video Out Time Select the amount of seconds each camera will be displayed on spot monitor