Filter
Top Products
2. Enter the assigned IP address from DVR setup menu into the IP ADDRESS field and enter
the password if DVR is using a password. After pressing OK, the LIVE screen appears after
it has been connected to the network.
7-4-3. NETWORK CLIENT S/W Start Up – Dynamic IP Address
1. If DVR is connected to LAN-DHCP or ADSL, identify the IP address that has been sent to
the established email address.
2. Run NETWORK CLIENT S/W and press the SITE button. A dialogue box for entering IP
address and password appears.
3. Enter the IP address received through the established email address into the IP ADDRESS
field and enter the password if DVR is using a password. After pressing OK, the LIVE screen
appears after it has been connected to the network.
71