Western Digital 4CH TRIPLEX DVR User Manual


 
SENSIVITY – Select from LOW, NORMAL, and HIGH
SENSOR1 / SENSOR2 / SENSOR3 / SENSOR4
TYPE: Select from NORMAL OPEN / NORMAL CLOSE
RELAY OUTPUT
ALARM: Select alarm to be set off when the sensor is activated
CHANNEL: Select channel to be recorded when the sensor is activated
DURAITON: Select the duration of recording when the sensor is activated
Please refer to “4-3-3 MUX Recording Mode”.
C. QUAD SETTING
QUALITY: Select quality among LOW / NORMAL / HIGH
AUDIO: Setup Volume Control and Input Gain
CHANNEL & MOTION
AVAILABLE FRAME RATE: Usable Frame
FRAME RATE: Select recording frame rate
RECORDED BY: SENSOR, MOTION, MANUAL
SENSOR PRERECORD
RECORD AUDIO: NONE, 1, 2, 3, 4
NET FRAME DROP
RELAY OUTPUT - ALARM: Select alarm to be set off when motion is detected
SENSIVITY – Select from LOW, NORMAL, and HIGH
SENSOR1 / SENSOR2 / SENSOR3 / SENSOR4
TYPE: Select from NORMAL OPEN / NORMAL CLOSE
RELAY OUTPUT
74