Filter
Top Products
16
If your going to use option B for you cable entry in to your RV/coach proceed
to step 1.
1. To install the cable roof-thru plate make sure that you have the following:
QTY Description Part # Use
1 3 oz. Silicone Sealant 2460007 Used to seal cable entry plates
1 Dual cable roof-thru plate 3200159 Seal dual cable entry
10 #10 x 1" Screw 2160178 Attach cable entry plate(s) to
roof
3. Apply silicone sealant under lip of roof-thru plate and where cable enters
roof. See Figure 18.
4. Attach plate to roof with screws provided. See Figure 18.
5. Apply silicone sealant over screws and around edge of roof-thru plate,
making sure cable entry is sealed.
Dual roof
thru plate
Apply silicone under lip and
cable roof hole
#10 x 1" Screws
Make sure cable
entry is sealed
Figure 18
Cable Roof-thru Plate Installation
Control cable and coax for
mount.
Rev. 6/98