Filter
Top Products
30
Model RD-9900
PINNACLE
POSITIONER
by WINEGARD
SELECT B
SELECT A
Model RD-9900
PINNACLE
POSITIONER
by WINEGARD
SELECT B
SELECT A
One requirement must be met to fully enjoy automatic system TV viewing.
The RV must be reasonably level. Any of the leveling indicators available
should be adequate for this purpose. If the RV is not leveled, the system
may not find the high power satellites.
After the RV has been leveled, proceed as follows:
NOTE: Winegard does not warrant this system to work outside the
continental United States (latitude 25
o
to 50
o
, longitude 65
o
to 125
o
).
To find the satellite by entering the latitude and longitude for your location
proceed as follows:
1. Turn TV ON and tune to channel 3 or 4 (output channel of receiver).
2. Press [POWER] on receiver remote to turn satellite receiver on.
3. On the positioner press [UP/DOWN] arrow button until Search DSS
appears on the positioner screen, Figure 17.
Figure 17
Figure 18
3. Press UP arrow button
4. Press [SELECT A] to enter the search function, Figure 17. (Press
[SELECT B] if Search DSS is bottom option on screen.
5. Press [UP] arrow button, Figure 18.
6. Press [SELECT B] Enter Location, Figure 18
NOTE: If you do not know your latitude and longitude you can refer to
Figure 40, page 25.
2. Press SELECT A
1. Press UP/DOWN arrow buttons to get
Search DSS on screen
4. Press SELECT B
Enter Elevation
Enter Location
Search DSS
Park
Finding the Satellite
Method 3:
Entering the Latitude
and Longitude
NOTE: SELECT A chooses
top option, SELECT B
chooses bottom option.