Filter
Top Products
34
Model RD-9900
PINNACLE
POSITIONER
by WINEGARD
SELECT B
SELECT A
MOVE TO LAST SATELLITE
NOTE: All commands will be shown in bold with brackets, example
[SELECT A].
Move to Last Satellite: This function allows you to move the antenna to the last
position that the system found a satellite. This feature is very useful. It allows
you to put the antenna into the travel position and if the RV/coach was not
moved return to watching TV without performing the search function. To move
antenna to the last satellite position, proceed as follows:
1. Press [UP/DOWN] arrow until Move to Last Sat is displayed on positioner.
See Figure 25.
1. Press UP/DOWN arrow
buttons to get Move to Last
Sat on screen
2. Press [SELECT A or B] Move to Last Sat, see Figure 25. The positioner
will display the message Moving to Satellite while antenna is moving to last
saved satellite position. When antenna stops moving, the system will acquire
satellite signal (if you have not moved the RV/coach) and you will be watching
TV!
Figure 25
2. Press SELECT A or B as
appropriate
Move to Last Sat
Manual Move