Filter
Top Products
Installation 9
MAN0157 (10/12/01)
SUB-FRAME INSTALLATION Cont’d
Sub-Frame Fit-Up (Cont.)
1. Rotate sub-frame up until locating lugs are posi-
tioned between front mount attached to loader mount.
2. Align holes and install lock pin (17) and klik pin
(16) as shown in Figure 11 & Figure 12.
3. Once sub-frame is secured into position with bent
pin, tighten all hardware to specifications given below.
4. Remove sub-frame from tractor once all hardware
is tightened.
1. 1004314 Crossmember (Woods)
4. 1004339 Front mount (Kioti)
16. 62043 Klik pin 1/4 x 1-3/4
17. 64953 Lock pin.75 x 17.75
Figure 11 Lock Pin Installed
Figure 12 Bent Pin Installation
17
16
DP6
1
6
4
4
1
CD5954-4
17
TORQUE SPECIFICATIONS
Cap Screw Qty
Wrench
Size Required Torque
M12 x 1.25 x 55mm 2 18mm 55 lbs.-ft. (75 N-m)
M14 x 1.50 x 35mm 2 21mm 87 lbs.-ft.(118 N-m)