Filter
Top Products
10 Installation
MAN0157 (10/12/01)
SUB-FRAME INSTALLATION Cont’d
Attach Sub-Frame to Backhoe
1. Align six holes on the backhoe with holes on sub-
frame.
2. Secure with six cap screws, flat washers, and hex
nuts as shown. Tighten according to specifications
given below.
Figure 13 Sub-Frame Installed to Backhoe
11. 1450 3/4 Hex nut
14. 57798 3/4 Hardened flat washer
19. 735 3/4 NC x 2 Cap screw
11
14
19
CD5953-2
11, 14, 19
DP14
TORQUE SPECIFICATIONS
Cap Screw Qty
Wrench
Size Required Torque
3/4 NC x 2 6 1-1/8” 297 lbs.-ft. (403 N-m)