Filter
Top Products
Hydraulic Installation 13
MAN0157 (10/12/01)
Connect Fittings to Hydraulic Manifold
IMPORTANT
■ Incorrect installation can damage the tractor
hydraulic system. Read and understand instructions
in the tractor manual before connecting.
NOTE: This hose kit contains items that will not be used
for installation with the 1009 loader.
1. Locate the hydraulic manifold on the tractor chassis
right side under the platform. The manifold contains
three auxiliary hydraulic ports and the control screw as
shown in Figure 16.
The control screw (2) is used to direct hydraulic flow and
must be positioned correctly to prevent damage to the
tractor hydraulic system.
2. Using a screwdriver, carefully turn control screw
counter-clockwise 1/4 turn to the vertical position.
See the tractor operator’s manual for control screw
instructions.
3. Use thread sealant on all pipe thread connections
and tighten securely to prevent leaks.
4. Remove three port plugs (1 - POWER BEYOND), (2
- PRESSURE), and (3 - RETURN) from manifold ports.
IMPORTANT
■ When backhoe and loader are removed, the con-
trol screw must be turned back to the three o’clock
position to prevent damage to tractor hydraulic sys-
tem.
Figure 16 Tractor Hydraulic Manifold
2
#1003179 Hose Kit
(For BH6500/7500 Backhoe & 1009 Loader)
1
4
2
3
DP10
Control Screw (Backhoe or Loader Valve Not Installed)
1 - Power-Beyond Port
2 - Pressure Port
3 - Tank/Return
4 - Control Screw
Control Screw (Backhoe or Loader Valve Installed)