Filter
Top Products
6 Installation
MAN0157 (10/12/01)
SUB-FRAME INSTALLATION Cont’d
Front Mounting Brackets
Woods 1009, 1012, 1016 Loaders
NOTE: Front mounting bracket (crossmember) is
installed with loader mounting kit #111768, (Figure 3).
Backhoe can only be installed after loader mounting kit
is installed.
Figure 3 Crossmember Installed with LMK #111768
Kioti 1470 Loader
1. Remove cross brace from right and left loader
mounts on the underside of tractor. Retain hardware for
later use.
2. Position front mount (4) under tractor and secure to
right and left loader mounts using hardware previously
removed, (Figure 4).
NOTE: Loosen hardware on loader mounts as needed
for easier installation of front mount hardware.
3. Secure rear half of mount to tractor frame using two
cap screw (18) and hardened flat washers (15).
4. 1004339 Front mount (Kioti loader)
15. 57816 1/2 Hardened flat washer
18. 65506 M12 x 1.25P x 35mm Cap screw
* Loader mount hardware
Figure 4 Front Mount Installed
Figure 5 Front Mount Installation
DP3
Right Loader Mount
Loader Mount Hardware
15
18
DP4
4
1
5
1
8
*
*
*
CD5954-1