12 Hydraulic Installation
MAN0157 (10/12/01)
Assemble Pump Kit #9261
NOTE: For complete information on pump kit installa-
tion, consult the Woods BH6500/7500 backhoe opera-
tors manual #37541.
NOTE: Discard pump mounting bracket provided in
pump kit #9261
1. Attach pump mounting bracket (6, supplied with sub-
frame mounting kit #1004327) to pump assembly as
shown in Figure 14.
2. Secure with two cap screws (A) and lock nuts (B)
from pump kit #9261 as shown.
3. Torque cap screws to 85 lbs.-ft.
1. ------ Pump assembly with adapter
2. 1004353 Pump mounting bracket
3. 765 1/2 NC Hex lock nut
4. ------ Tractor drawbar bracket
5. 3379 1/2 NC x 1-1/2 Cap screw
6. ------ Tractor PTO shaft
Figure 14 Pump Bracket Installed
Figure 15 Pump Bracket Installation
NOTE: When pump kit assembly is completed proceed
to Sub-Frame & Backhoe to Tractor, page 23.
1
#9261 Pump Kit
(For BH6500/7500 Backhoe Only)
Pump Bracket
#1004353
DP8
4
3
2
1
CD4696
5
6