Hydraulic Installation 17
MAN0157 (10/12/01)
#1003179 Hose Kit for 1009 Loader Cont’d
Connect Hoses to Hydraulic Manifold
(Backhoe Only)
1. Connect backhoe valve OUT hose (red band N) to
the tee in the hydraulic manifold RETURN port.
2. Connect backhoe valve IN hose (yellow band M) to
the hydraulic manifold PRESSURE port (green band L).
Figure 24 Backhoe Hose Installation
Backhoe & Loader Removed
NOTE: See Remove Backhoe With Sub-Frame, page 24
to remove backhoe. See Loader Manual to remove
loader.
1. Remove all hoses from Hydraulic Manifold.
2. Cover male quick couplers with dust caps.
3. Turn control screw on Hydraulic Manifold back to the
3 o’clock position.
IMPORTANT
■ When backhoe and loader are removed, the con-
trol screw must be turned back to the three o’clock
position to prevent damage to tractor hydraulic sys-
tem.
Figure 25 Control Screw in 3 O’Clock Position
2
L
N
M
P
N
M
Male
Female
Male
Female
Male
Male
Backhoe
OUT
Backhoe
IN
PBY
PRESSURE
RETURN
CD5918-9
Control Screw
DP10