Hydraulic Installation 11
MAN0157 (10/12/01)
HYDRAULIC INSTALLATION
Keep hands and body away from pressurized
lines. Use paper or cardboard, not hands or other
body parts to check for leaks. Wear safety goggles.
Hydraulic fluid under pressure can easily penetrate
skin and will cause serious injury or death.
Make sure that all operating and service person-
nel know that if hydraulic fluid penetrates skin, it
must be surgically removed as soon as possible by
a doctor familiar with this form of injury or gan-
grene, serious injury, or death will result. CONTACT
A PHYSICIAN IMMEDIATELY IF FLUID ENTERS SKIN
OR EYES. DO NOT DELAY.
Make sure all hydraulic hoses, fittings, and
valves are in good condition and not leaking before
starting power unit or using equipment. Check and
route hoses carefully to prevent damage. Hoses
must not be twisted, bent sharply, kinked, frayed,
pinched, or come into contact with any moving
parts. Operate moveable components through full
operational range to check clearances. Replace any
damaged hoses immediately.
THE FOLLOWING INSTRUCTIONS ARE FOR OPERATING THE BACKHOE USING
FOUR OPTIONS:
#9261 Pump Kit
For use with BH6500/7500 Backhoe . . . . . . . . . . . . . . . . . . . . . . . . .12
#1003179 Hose Kit
For use with BH6500/7500 Backhoe and 1009 Loader . . . . . . . . . .13
#1003179 Hose Kit
For use with BH6500/7500 Backhoe and 1012/1016 Loaders. . . . .18
1
2
3