Filter
Top Products
Hydraulic Installation 15
MAN0157 (10/12/01)
#1003179 Hose Kit for 1009 Loader Cont’d
Assemble Loader Valve Hoses
1. Attach elbow (2), blue band (P), dust plug (K), and
female quick coupler (4) to one 42” hose (6).
2. Attach hose to loader valve OUT port.
3. Attach elbow (2), green band (L), and male quick
coupler (4) to second 42” hose (6).
4. Attach hose to loader valve IN port.
NOTE: If loader valve kit has been previously installed,
remove fitting from loader valve PBY port. Install elbow
(F) in this port. New loader valve will already have elbow
(F) installed.
5. Attach a yellow band (M) and female quick coupler
(4) to the 50” hose (9).
6. Attach hose to the loader valve PBY port.
2. 313017 Elbow, 3/8 NPTM x 3/8 NPTF
4. 316007 Quick coupler set, 3/8
6. 56245 Hose, 42” x 3/8 NPTM x 9/16 JICF
9. 59261 Hose, 50” x 3/8 NPTM x 9/16 JICF
F. 63558 Elbow, 9/16 JICM x 9/16 ORBM
K. 395065 Dust cap & plug set, 3/8
L. 56061 Plastic band, Green
M. 56062 Plastic band, Yellow
P. 395062 Plastic band, Blue
Figure 20 Loader Valve Hose Assembly
Assemble Backhoe Valve Hoses
1. Attach yellow band (M) and male quick coupler (4) to
one 100” hose (Q).
2. Attach hose to backhoe valve IN port.
3. Attach elbow (E), red band (N), and female quick
coupler (H) to second 100” hose (Q).
4. Attach hose to backhoe valve OUT port.
5. Route hoses (Q) through guides on sub-frame weld-
ment.
6. Secure hoses with nylon ties every 20”.
7. Install decal #56139 to right tractor fender.
E. 313017 Elbow, 3/8 NPTM x 3/8 NPTF
H. 64299 Female quick coupler
M. 56062 Plastic band, Yellow
N. 395061 Plastic band, Red
Q. 1003190 Hose, 100” x 3/8 NPTM x 3/4 ORBM
4. 316007 Quick coupler set, 3/8
Figure 21 Backhoe Valve Hose Assembly
2
6
2
L
4
4
P
K
2
6
F
4
M
9
CD5918-4
Loader
Valve
"IN"
Loader
Valve
"OUT"
Loader
Valve
"PBY"
H
N
E
Q
Q
M
4
CD5918-5
Backhoe
Valve
"IN"
Backhoe
Valve
"OUT"