Filter
Top Products
PV154 - 923-03506 1-14 ZP26/28 - MENUS
USER MENUS
SETUP
Press MENU and then the RIGHT/LEFT arrow button
to access the Special Menu. Press the UP/DOWN arrow
to choose Parental Control and then press the RIGHT
arrow button to activate Parental Control. When
prompted, enter the default code 7777 from the
number keypad. If you wish to change the code, select
“Change Secret Code” and enter the new code through
the number keypad. If you forget your code, just
reenter “7777” to reset to factory preset code.
Use the UP/DOWN arrow button to choose your Block
options, press SELECT to confirm your choice:
• Channel: Selects the channel you wish to restrict.
• Video Lock: Selects the Video Inputs to be blocked.
• Quick Lock: Blocks CH3 and CH4 on ANT 1 and 2,
as well as all 3 video input jacks.
• Front Panel Lock: Blocks front panel controls from
being used. Only Power button will work when
this feature is active.
Now you will set the Ratings for the channel you
wish to block. Press the UP/DOWN arrows to select
the following rating formats and press the RIGHT arrow
button to activate each rating menu:
• Movie Ratings: Sets ratings based on MPAA rat-
ings system.
• TV Ratings: Sets ratings based on the age of viewer
and content of programming.
• Canadian Ratings (Eng): Sets age ratings for Ca-
nadian broadcasting (Eng).
• Canadian Ratings (Frn): Sets age ratings for Cana-
dian broadcasting (Frn).
For each rating menu, use the UP/DOWN arrow buttons
to choose the level of rating you wish to block. Use
the SELECT button to lock or unlock the rating
selection. Press QUIT to save and exit.
Notes
• Select the input source first in order to use Video
lock; press the source button repeatedly on the
remote until you select Input 1, Input 2, Input 3,
Input 4, or Input 5. The same applies to unlocking
the Video Lock.
• If Ant 1 and Ant 2 are set to the same signal source
mode if a channel is locked, it is locked on both Ant
1 and Ant 2 inputs.
• Be sure the TV’s internal clock is set before using
any Parental Control options.
• Text automatically appears on the screen to indicate
if Parental Control (Child Lock) is activate.
SECURITY TIMER
Use the Security Timer to program your TV to turn on,
tune to the preset channel, and then turn off
automatically at the times specified.
QuitTo ExitTo Menu BarMenu
1234
--:--AmTVOn
--:--
Am TV Off
Mon (Day of Week)
- - Channel
Once
Daily
Weekly
Off
Security Timer
SEL
Press select to set
SPECIAL
Press MENU and the RIGHT/LEFT arrow button to access
the Special Menu. Use the UP/DOWN arrow to choose
Security Timer. Press the RIGHT arrow button to go to
the Security Timer option. You may set up to four ON/
OFF times for your TV. Use the RIGHT arrow button to
choose 1-4, then press the DOWN arrow button to go
to the TV On time option. Press RIGHT arrow to Set On
time. Set time using the LEFT/RIGHT and UP/DOWN
arrow buttons (the same way you set the TV’s clock).
Press the LEFT arrow button repeatedly until the cursor
appears to the left of the current line item. Use the
DOWN arrow button to choose Day, press the RIGHT
arrow. Use the UP/DOWN arrow to choose which day of
the week (if necessary). Press the LEFT arrow button
repeatedly until the cursor appears to the left of the
current line item. Use the DOWN arrow to choose
Channel.
Set the channel for the TV to tune to by entering the
channel number using the number keypad. Press the
LEFT arrow button repeatedly until the cursor appears
to the left of the current line item. Use the UP/DOWN
arrow buttons to choose Once, Daily, Weekly or Off.
Press SELECT to confirm your selection. Repeat steps
3-8 for three more “events” or press QUIT to save and
exit.
Notes
• Security Timer is designed to program the TV to turn
on and off automatically. If the On Timer turned the
TV on and you change channels, the Off timer is
deactivated — then if no remote key is pressed, the
TV turns off automatically after three hours.
• For safety reasons, it is not recommended to use the
Security Timer feature to turn your TV on and off
while no one is at home.