Filter
Top Products
PV154 - 923-03506 1-16 ZP26/28 - MENUS
USER MENUS
RESET
Use the UP/DOWN arrow to choose Reset (Reset restores
the levels to their original settings). Press SELECT to
confirm your choice.
ADVANCED SETTINGS
Use the UP/DOWN arrow to choose Advanced Settings.
Press the RIGHT arrow button to activate the Advanced
Settings menu. Use the UP/DOWN arrow to choose from
the following options. Press SELECT to confirm your
choice:
• Light Sentry: Automatically monitors and adjusts
contrast depending on room lighting to produce
a more natural picture. Also adjusts Auto Flesh
Tone and Video Filter depending on signal.
• Auto Flesh: Automatically monitors and adjusts the
color to maintain constant color levels even after
a program or channel changes.
• Weak Signal: Automatically reduces conspicuous
noise in the picture without degrading picture
quality.
• Color Temperature: Set this to Warm for hotter col-
ors such as red, set to Cool for less intense colors
with more blue, or Medium for normal color ap-
pearance.
Press QUIT to save and exit.
Notes
• It may be necessary to adjust TINT for optimum
picture quality, when viewing component video
sources (Y-PBPR) connected to Inputs 3/4.
• When viewing component video sources (Y-PBPR)
connected to Inputs 3/4, if the TINT and COLOR
in the picture appear to be abnormal, check to be
sure that the correct Component Color Type is se-
lected for the Picture Formats option on the Setup
menu.
AUDIO MENU
Bass 75 %
Treble
50%
Balance
50%
Reset
Advanced
Settings
QuitTo ExitTo Menu BarMenu
VIDEOSETUP AUDIO THEATER
SEL
SPECIAL
PICTURE SETTINGS
Press MENU and use the RIGHT/LEFT arrow button to
access the Audio Menu. Use the UP/DOWN arrow to
choose one of the following options. Use the RIGHT/
LEFT arrow buttons to adjust that option.
• Bass: Increase/decrease lower-end sounds.
• Treble: Increase/decrease higher-end sounds.
• Balance: Allows you to put the sound more to the
left or right channel.
RESET
Use the UP/DOWN arrow to choose Reset (Reset restores
the levels to their original settings). Press SELECT to
confirm your choice.
ADVANCED SETTINGS
Use the UP/DOWN arrow to choose Reset (Reset restores
the levels to their original settings). Press SELECT to
confirm your choice. Use the UP/DOWN arrow to choose
Advanced Settings. Press the RIGHT arrow button to
activate the Advanced Settings menu. Use the UP/
DOWN arrow to choose from the following options.
Press SELECT to confirm your choice:
• Stereo: Activate stereo sound.
• Mono: Activate mono sound.
• Second Audio Programming: Activates separate
audio channel available with some programming.
• Internal Speakers: This function is useful when first
setting up external speakers, or if you prefer to
use only speakers from a separate stereo system.
• Auto Noise Cancel: Use to eliminate the noise be-
tween stations.
• Loudness: This function will improve the quality
of both low and high frequency sounds when lis-
tening at low volume levels.
• SoundRite: This function will automatically adjust
volume so each channel has the same average vol-
ume level Press QUIT to save and exit.
Not all programming is broadcast in stereo sound, or
has Second Audio Programming/SAP. Programming that
doesn’t broadcast SAP may be silent when you set your
Entertainment Machine on this setting.