JR Direct XP8103 Manual

A SERVICE OF

next previous

ACRO 43

4.9 Snap Roll (Function Mode), cont.

Channel

Indicators

Direction Indicator

(this example shows

right down snap roll)

Operating value of each

functions (0–125%)

(4.9A)

(4.9B)

Snap Roll Direction Change

Once the snap rolls are established in the Function Mode, they

can be selected using the UP/DN and +/- keys located on the

front of the transmitter while in the normal display. Refer to Figure

4.9C. The adjustable range for each function is 0-125%; the

factory default is 100%. When the Snap Roll Function is active,

the direction will be indicated in the normal display (ﬁgure C).

Press the UP and DN keys

simultaneously to enter/exit

the Function Mode

Press the DN and Select keys

simultaneously to access the

Function Mode List Display

Press the + or - keys

to activate Snap Roll

function, to

increase/decrease

operating values and

to select Snap Roll

directions

Press to

manipulate

arrow to desired

channel/function

Press to reset

operating values at

cursor, or to inhibit

function when cursor

is at "Direction"

DN

SELECT

CH CH CLEARUP

To Differential Aileron

Mixing (if activated) or

Trim Offset Memory

To Landing

System Mode