HELI 66
3.4 Model Select (System Set-Up Mode)
The XP8103 transmitter employs a memory function which
memorizes data for up to 10 individual aircraft. All settings
along with type selection, function, and different aircraft are
used by one transmitter. For example, Model 1 is helicopter and
Model 2 is airplane. To avoid confusing models, inputing model
names for each aircraft is recommended (see page 67). Press
the UP and DN keys simultaneously and turn the power switch
ON to access the System Set-Up Mode.
The display below shows the model selection function.
To enter the List Mode, press the DN and SEL keys
simultaneously. From this display, pressing the UP and DN keys
simultaneously will move the system from the list mode to the
function shown at the cursor. Note that the cursor is moved by
the UP and DN keys.
3.3 List Mode
Press simultaneously
to access function at
cursor
Press to select either of
two Function List screens
Inactive while in List Mode screen
