ST-4
USER MANUAL
13
~ BATTERY SAVING – SELF POWER OFF (TIMER OFF)
If no key of the meter is pressed within the self power off time herein sat, the meter
automatically turns itself off in order to save battery life. To set up the auto power
off time, rotate the decoder [M] to highlight the item TIMER OFF, then press it. The
black icon which highlights the item POWER OFF starts blinking. Rotate the
encoder [M] and select: OFF
(meter always on), 5 min (meter turns off in 5
minutes), 10 min
(meter turns off in 10 minutes). OFF (meter always on). Press the
encoder [M] to enter your selection.
~ FIELD AND CHANNEL POWER MEASUREMENT UNIT
Using the Standard Navigation Mode, highlight the item UNIT and select the
requested measurement unit: dBm
, dBmV (dBmillivolt) dBuV (dBmicrovolt)
~ LANGUAGE
Using the Standard Navigation Mode, highlight the item LANGUAGE and select
the required language. In some releases of the meter English language only might
be available.
~ KEYS BEEP
Using the Standard Navigation Mode, highlight the item KEYS BEEP and select
the desired keys beep volume: OFF
, LOW, MEDIUM, HIGH (max.).
~ DISPLAY BACKLIGHT
If no key of the meter is pressed within the backlight power off time herein sat, the
display backlight automatically turns itself off in order to save battery life.
To set up the auto backlight power off time, highlight the item DISP.LIGHT using
the Standard Navigation Mode, then select FullON
(backlight always on) or 30 sec
(backlight turns off within 30 sec).
