A SERVICE OF

logo

ST-4
USER MANUAL
35
{ AUDIO AND VIDEO PEAK LEVEL DETECTED INTO EACH CHANNEL
Using the Standard Navigation Mode, select AUD/LEV. Each bar will display at the
same time the real time audio peak level and the real time video peak level measured
in the corresponding channel.
{ SIGNAL LEVEL COMPARISON (TILT) BETWEEN TWO USERS-
DEFINED CHANNEL
Using the Standard Navigation Mode, select TILT. The meter will display the signal
level difference between two user-defined channels. These two channels can be
directly set while this measurement function is active.
~ACTIVATE THE FULL BAND MAPPING
Select one channel ID in the band (VHF, UHF, or CATV) to be analyzed (refer to
Chapter 11.1 SURFING THE CHANNELS at page 34.
{ FULL BAND SIGNAL LEVEL ANALYSIS IN EACH CHANNEL (LEVEL)