ST-4
USER MANUAL
14
7.2 MAIN RECEPTION PARAMETER SETUP
Using the Standard Navigation Mode, highlight the item TV CONFIG.& COUNTRY.
Press the encoder [M] to enter the reception parameters setup menu.
~COUNTRY CHANNEL PLAN
Rotate the encoder [M] to highlight the item COUNTRY.
Press the encoder [M] once. Then, using the Standard Navigation Mode, select
the relevant Country Channel Plan (for example: ITALY)
~ LOCAL OSCILLATOR (FREQUENCY)
Set up the appropriate local oscillator frequency value in case a frequency
conversion of the received signals is required, .
Highlight the item LNB L.O. using the Standard Navigation Mode, then set the
required frequency (rate) of the local oscillator. The default value is 0MHz
(no
frequency conversion).
~RF INPUT SIGNAL TYPE (CABLE OR OFF AIR)
Using the Standard Navigation Mode, highlight the AUTOMEMORY item select the
RF band, terrestrial analogue and digital, (TV ONLY) or cable (CATV).
7.3 SATELLITE RECEPTION SETUP
Rotate the encoder [M] to highlight the item SAT CONFIG, then press it to
enter the selection menu.
