ST-4
USER MANUAL
39
~SEEK&STORE (SCAN) START
Using the Standard Navigation Mode, highlight the display bottom row.
If START?
appears a brand new memory plan will be stored. Should
OVERWRITE?
appear, the selected target Automemory plan already contains
data, and will be overwritten without further notice.
Press the encoder [M] knob once and the auto seek & store will start. The display
will also give information on the status of the research. When finished, the total
number of both analogue and digital found and stored channels will be displayed.
12.2 MANUALLY CREATING A MEMORY PLAN: MANUMEMORY
Press and release the MANUMEMORY [9] key.
~CREATE A BRAND NEW MEMORY PLAN
Using the Standard Navigation Mode, highlight the MANUxx item of the LCD
display top row on the left and select the desired target memory plan. When the
current target plan is void, the LCD row under the dotted line bottom row displays
MEM P1: ---.
x Select a void memory plan (the LCD row under the dotted line bottom row
displays MEM P1: ---)
x Using the Standard Navigation Mode, highlight the channel ID item in the first
row of the LCD display. Then select the channel ID to be stored into the target
memory plan.
x Using the Standard Navigation Mode, highlight the SAVE? item.
x Press the encoder knob. The selected channel will be stored.
To add further channels to the current memory plan:
x Using the Standard Navigation Mode, highlight the channel ID item in the first
row of the LCD display. Then select the new channel ID to be stored.
x Using the Standard Navigation Mode, highlight the MEM..:P item, and select a
void memory position (the LCD row under the dotted line will displays, e.g.
MEM: P 5: ---).
x Highlight the SAVE? item.
x Press the knob. The selected channel has now been stored.
Press once and release the MEAS [4] key to quit the memory menu.
