ST-4
USER MANUAL
15
~LOCAL OSCILLATOR SETUP
Using the Standard Navigation Mode, highlight the item LOC.OSC. and select
STANDARD
(signal coming directly from the antenna, down-conversion required) or
0MHz(IF)
(intermediate frequency signal, e.g. from a LNB).
~LNB 1 ALLOWED POLARIZATION SETUP
Using the Standard Navigation Mode, highlight the item LNB1 DiSEqC and select
the required polarization for the LNB1 (A
=4 polarizations, B=8 polarizations, C=12
polarizations, D
=16 polarizations).
~LNB 2 ALLOWED POLARIZATIONS SETUP
Using the Standard Navigation Mode, highlight the item LNB1 DiSEqC and select
the required polarization for the LNB2 (A
=4 polarizations, B=8 polarizations, C=12
polarizations, D
=16 polarizations).
~SINGLE-CABLE SCR COMPLIANT LNB OR MULTISWITCH SETUP : SAT SCR
MENU
This function allows the user to check and manage single cable multi-users
satellite installations.
Press once and release the S.C.R. LNB
[E] key. The LCD [F] will display
the SAT SCR configuration menu:
{ SatSCR USER:
Using the Standard Navigation Mode, highlight the item SatSCR USER. and
select the appropriate user. Up to 8 different users can be set up together with
their relevant SCR frequency value.
To manually enter each frequency value, proceed as described at paragraph
SatSCR FREQ at page 16. If the SatSCR USER
item is set to NONE, it won’t be
possible to set up any frequency value.
{ SatSCR FREQ:
Using the Standard Navigation Mode, highlight the SatSCR USER item and
select the User whose SCR frequency value has to be set up.
Using the Standard Navigation Mode, highlight the SatSCR FREQ item and set
up the required frequency value. If the SatSCR USER
item is set to NONE, it
won’t be possible to set any frequency value.
