ST-4
USER MANUAL
70
23 CREATING A TRANSPONDER MEMORY PLAN
23.1 MANUALLY CREATING A TRANSPONDER MEMORY PLAN:
MANUMEMORY
Press and release the MANUMEMORY [9] key.
~CREATE A BRAND NEW MEMORY PLAN
Using the Standard navigation Mode, highlight the MANUxx item in the LCD top
left corner. Select the memory plan to be created (target memory plan). When the
current target memory plan is void, the LCD displays (top row, right to the
MANUxx
item) PR 1; otherwise, a number greater than 1 will appear to the right
hand-side of item PR
.
Using the Standard Navigation Mode, highlight the MANUxx item and then select a
void memory plan.
x Highlight the signal type item displayed on the LCD second row (analogue,
digital DVB-S, digital DSS) and select the required signal type. Then proceed
in the same way with the LNB high/low band and polarization, DISEqC, Local
oscillator (L.O.) and Symbol rate (SR).
x Highlight the frequency value displayed on the LCD top right corner, and select
the desired value. Rotate the encoder [M] quickly to speed up the frequency
surfing.
x Highlight the item STORE? AND press the encoder knob [M] to store the
selected transponder.
To add further transponders to the memory plan, highlight the signal type icon and
proceed as described above.
Press once and release the MEAS [4] key to quit this function.
~ADDING A FURTHER TRANSPONDER TO AN EXISTING MEMORY PLAN
Using the Standard Navigation Mode, highlight the MANUxx item (MANU 1, MANU
2, …) in the LCD top left corner, and select the desired memory plan. On the right
