A SERVICE OF

logo

ST-4
USER MANUAL
29
{ IMPULSE RESPONSE OF THE SELECTED CHANNEL
From the previous measurement screen (TFT), press once and release the MEAS [4] key.
The impulse response of the tuned channel will be displayed.
To tune a different channel, using the Standard Navigation Mode, highlight the channel
ID item and select the required channel.
WARNING: only the channels included into the Channels Plan (PLAN) in use will be
displayed.
Refer to Chapter 9 SIGNAL TUNING: PLAN at page 19
To switch from the time to space domain for the echoes measurement, using the
Standard Navigation Mode highlight the (DIST or TIME) item at the top of the vertical
axis and select the required domain.