A SERVICE OF

logo

ST-4
USER MANUAL
36 bis
E
L (AUD/VID)
Each black bar will contain a white pixel in it.
The overall height of each bar displays the video peak level measured in the relevant
channel.
The height of the bar segment between the x-axis and the above white pixel displays
the audio peak level measured in the relevant channel.
The marker (the vertical dotted line) is positioned on the channel which is currently
displayed in the centre field of the LCD top row and whose frequency is displayed in
the LCD top right edge. The LCD bottom row displays the video peak level measured
in the currently selected channel (MRK) together with the measurement unit currently
set for the meter. An horizontal dotted line shows the real time video peak level
measured in the currently selected channel.
This measure makes sense when performed on analogue signals only.
H
ANNELS (TILT)
Two triangle - shaped markers on the x-axis locate the two channels whose signal
level is under comparison.