A SERVICE OF

logo

ST-4
USER MANUAL
35 bis
This display mode make sense only when performed on analogue signals.
Press once and release the BARSCAN
[0] key. Depending on the selected
configuration a specific bar diagram will be displayed.
The marker (the vertical dotted line) is positioned on the channel which is currently
displayed in the centre field of the LCD top row and whose frequency is displayed in
the LCD top right edge. The LCD bottom row displays the signal level measured in the
currently selected channel (MRK) together with the measurement unit currently set for
the meter. An horizontal dotted line shows the real time signal level value measured in
the currently selected channel.