ST-4
USER MANUAL
60
The LCD first row displays (left to right) the selected Transponder Memory Plan, the
transponder currently in use, the relevant frequency value.
~SELECT THE REQUIRED TRANSPONDER
Highlight the currently tuned transponder and select the required transponder. Each
encoder step selects the previous or the next transponder. To speed up the surfing,
rotate the encoder quickly.
ONLY A TRANSPONDER INCLUDED IN THE SELECTED TRANSPONDER
MEMORY PLAN CAN BE SELECTED.
~MANUALLY MODIFY THE FREQUENCY VALUE
Should you need to manually modify the frequency value, highlight the current
frequency value item. Each encoder step increase or decrease the frequency value
by 0,1 MHz. To speed up the surfing, rotate the encoder quickly.
~MODIFY THE TRANSPONDERS GROUP TO BE EXPLORED
The transponders group can be modified only from the main screen. Press once and
release the PLAN [1] key and select the item MANUAL MEMORY to enter the main
screen.
WARNING: After showing the user defined Transponder Memory Plans, the
meter will display the pre-stored groups of transponder (refer to Chapter 19.1
EXPLORING ALL THE TRANSPONDERS OF A SATELLITE at page 57)
