Filter
Top Products
Protected Settings Menu
28
Mio Modero R-4
6. Reboot the Mio R-4 from the Reboot Page (see the Reboot Page section on page 30).
7. Select the Back button until you are out of the Setup Menu.
Changing the Master Connection Type
1.
Select Protected Settings in the Setup Menu.
2. Select System Settings in the Protected Settings Menu.
3. Select the device’s down arrow to navigate to the second page. The Type button lists the current
Master Connection type for the unit: USB or Mesh.
4. Press the Type button to select the preferred Master Connection type. To return to Mesh from USB
and vice versa, press the Type button again.
5. Select the Back button once until you return to the Protected Settings page.
6. Reboot the Mio R-4 from the Reboot Page (see Reboot Page section on page 30).
In addition to the Abort button, should you decide not to change the Device Number
for any reason, press the Back button (FIG. 1) to return to the last page displayed.