Filter
Top Products
Programming the Mio R-4
48
Mio Modero R-4
"^" Button Commands with Embedded Codes
^BMF
(Cont.)
For some of these commands and values, refer to theRGB Values for all 88
Basic Colors table on page 35.
• ’%CF<on fill color>’ = Set Fill Color.
• ’%CB<on border color>’ = Set Border Color.
• ’%CT<on text color>’ = Set Text Color.
• ’%SW<1 or 0>’ = Show/hide a button.
• ’%ST<style>’ = Button style.
• ’%EN<1 or 0>’ = Enable/disable a button.
• ’%WW<1 or 0>’ = Word wrap ON/OFF.
• ’%GH<bargraph hi>’ = Set the bargraph upper limit.
• ’%GL<bargraph low>’ = Set the bargraph lower limit.
• ’%GN<bargraph slider name>’ = Set the bargraph slider name/Joystick
cursor name.
• ’%GC<bargraph slider color>’ = Set the bargraph slider color/Joystick cursor
color.
• ’%GI<bargraph invert>’ = Set the bargraph invert/noninvert or joystick
coordinate (0,1,2,3). ^GIV section on page 59 more information.
• ’%GU<bargraph ramp up>’ = Set the bargraph ramp up time in intervals of 1/
10 second.
• ’%GD<bargraph ramp down>’ = Set the bargraph ramp down time in 1/10
second.
• ’%GG<bargraph drag increment> = Set the bargraph drag increment. Refer
to the ^GDI command on page 59 for more information.
• ’%OT<feedback type>’ = Set the Feedback (Output) Type to one of the
following:
None, Channel,Invert, ON (Always ON), Momentary, or Blink.
• ’%SM’ = Submit a text for text area button.
• ’%SF<1 or 0>’ = Set the focus for text area button.
• ’%OP<0-255>’ = Set the button opacity to either Invisible (value=0) or
Opaque (value=255).
• ’%OP#<00-FF>’ = Set the button opacity to either Invisible (value=00) or
Opaque (value=FF).
• ’%UN<Unicode text>’ = Set the Unicode text. See the^UNI section on
page 64 for the text format.
• ’%EF<text effect name>’ = Set the text effect.
• ’%EC<text effect color>’ = Set the text effect color.
• ’%ML<max length>’ = Set the maximum length of a text area.
• ’%MK<input mask>’ = Set the input mask of a text area.
Example:
SEND_COMMAND Device,"'^BMF-500,1,%B10%CFRed%CB Blue
%CTBlack%Ptest.png'"
Sets the button OFF state as well as the Border, Fill Color, Border Color, Text
Color, and Bitmap.