Filter
Top Products
Programming the Mio R-4
76
Mio Modero R-4
Panel Run Time Commands (Cont.)
DBEEP
Output a double
beep
Output a double beep.
Syntax:
SEND_COMMAND <DEV>,"'DBEEP'"
Example:
SEND_COMMAND Device,"'DBEEP'"
Outputs a double beep.
@EKP
Extend the
keypad
Extend the keypad. Pops up the keypad icon and initializes the text string to that specified.
The Prompt Text is optional.
Syntax:
SEND_COMMAND <DEV>,"'@EKP-<initial text>;<prompt text>'"
Variables:
• initial text = 1 - 50 ASCII characters.
• prompt text = 1 - 50 ASCII characters.
Example:
SEND_COMMAND Device,"'@EKP-33333333;Enter Password'"
Pops up the Keypad and initializes the text string '33333333' with prompt text 'Enter Pass-
word'.
PKEYP
Present a private
keypad
Present a private keypad. Pops up the keypad icon and initializes the text string to that
specified. Keypad displays a '*' instead of the numbers typed. The Prompt Text is optional.
Syntax:
SEND_COMMAND <DEV>,"'PKEYP-<initial text>'"
Variables:
• initial text = 1 - 50 ASCII characters.
Example:
SEND_COMMAND Device,"'PKEYP-123456789'"
Pops up the Keypad and initializes the text string '123456789' in '*'.
@PKP
Present a private
keypad
Present a private keypad. Pops up the keypad icon and initializes the text string to that
specified. Keypad displays a '*' instead of the numbers typed. The Prompt Text is optional.
Syntax:
SEND_COMMAND <DEV>,"'@PKP-<initial text>;<prompt text>'"
Variables:
• initial text = 1 - 50 ASCII characters.
• prompt text = 1 - 50 ASCII characters.
Example:
SEND_COMMAND Device,"'@PKP-1234567;ENTER PASSWORD'"
Pops up the Keypad and initializes the text string 'ENTER PASSWORD' in '*'.
SETUP
Send panel to
Setup page
Send panel to Setup page.
Syntax:
SEND_COMMAND <DEV>,"'SETUP'"
Example:
SEND_COMMAND Device,"'SETUP'"
Sends the panel to the Setup Page.