Filter
Top Products
Programming the Mio R-4
75
Mio Modero R-4
Panel Run Time Commands (Cont.)
AKEYR
Remove the
Keyboard/Keypad
Remove the Keyboard/Keypad. Remove keyboard or keypad that was displayed using
'AKEYB', 'AKEYP', 'PKEYP', @AKB, @AKP, @PKP, @EKP, or @TKP commands.
Syntax:
SEND_COMMAND <DEV>,"'AKEYR'"
Example:
SEND_COMMAND Device,"'AKEYR'"
Removes the Keyboard/Keypad.
@AKP
Pop up the
keypad icon and
initialize the text
string
Pop up the keypad icon and initialize the text string to that specified. Keypad string is set
to null on power up and is stored until power is lost. The Prompt Text is optional.
Syntax:
SEND_COMMAND <DEV>,"'@AKP-<initial text>;<prompt text>'"
Variables:
• initial text = 1 - 50 ASCII characters.
• prompt text = 1 - 50 ASCII characters.
Example:
SEND_COMMAND Device,"'@AKP-12345678;ENTER PASSWORD'"
Pops up the Keypad and initializes the text string '12345678' with prompt text 'ENTER
PASSWORD'.
@AKR
Remove the
Keyboard or
Keypad
Remove the Keyboard or Keypad. Remove keyboard or keypad that was displayed using
'AKEYB', 'AKEYP', 'PKEYP', @AKB, @AKP, @PKP, @EKP, or @TKP commands.
Syntax:
SEND_COMMAND <DEV>,"'@AKR'"
Example:
SEND_COMMAND Device,"'@AKR'"
Removes the Keyboard/Keypad.
BEEP
Output a beep
Output a beep.
Syntax:
SEND_COMMAND <DEV>,"'BEEP'"
Example:
SEND_COMMAND Device,"'BEEP'"
Outputs a beep.
BRIT
Set the panel
brightness
Set the panel brightness.
Syntax:
SEND_COMMAND <DEV>,"'BRIT-<brightness level>'"
Variables:
• brightness level = 0 - 100.
Example:
SEND_COMMAND Device,"'BRIT-50'"
Sets the brightness level to 50.
@BRT
Set the panel
brightness
Set the panel brightness.
Syntax:
SEND_COMMAND <DEV>,"'BRIT-<brightness level>'"
Variables:
• brightness level = 0 - 100.
Example:
SEND_COMMAND Device,"'BRIT-70'"
Sets the brightness level to 70.