Filter
Top Products
Programming the Mio R-4
44
Mio Modero R-4
Page Commands (Cont.)
@PPK
Deactivate a
popup page from
all pages
Kill a specific popup page from all pages. Kills refers to the deactivating (Off) of a popup
window from all pages. If the pop-up page is part of a group, the whole group is
deactivated. This command works in the same way as the 'Clear Group' command in
TPDesign4.
Syntax:
SEND_COMMAND <DEV>,"'@PPK-<popup page name>'"
Variable:
• popup page name = 1 - 50 ASCII characters. Name of the popup page.
Example:
SEND_COMMAND Device,"'@PPK-Popup1'"
Kills the popup page 'Popup1' on all pages.
@PPM
Set the modality
for a popup page
Set the modality for a specific popup page to either Modal or Non-Modal. A Modal popup
page, when active, only allows you to use the buttons and features on that popup page. All
other buttons on the panel page are inactivated.
Syntax:
SEND_COMMAND <DEV>,"'@PPM-<popup page name>;<mode>'"
Variables:
• popup page name = 1 - 50 ASCII characters. Name of the popup page.
• mode = NONMODAL converts a previously Modal popup page to a NonModal.
MODAL converts a previously NonModal popup page to Modal.
modal = 1 and non-modal = 0
Examples:
SEND_COMMAND Device,"'@PPM-Popup1;Modal'"
Sets the popup page 'Popup1' to Modal.
SEND_COMMAND Device,"'@PPM-Popup1;1'"
Sets the popup page 'Popup1' to Modal.
@PPN
Activate a popup
page to launch
Activate a specific popup page to launch on either a specified page or the current page. If
the page name is empty, the current page is used (see example 2). If the popup page is
already on, do not re-draw it. This command works in the same way as the 'Show Popup'
command in TPDesign4.
Syntax:
SEND_COMMAND <DEV>,"'@PPN-<popup page name>;<page name>'"
Variables:
• popup page name = 1 - 50 ASCII characters. Name of the popup page.
• page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On
Example:
SEND_COMMAND Device,"'@PPN-Popup1;Main'"
Activates 'Popup1' on the 'Main' page.
Example 2:
SEND_COMMAND Device,"'@PPN-Popup1'"
Activates the popup page 'Popup1' on the current page.