Filter
Top Products
Protected Settings Menu
29
Mio Modero R-4
Site Survey
The Site Survey page (FIG. 19) is a report of the wireless networks found and the status of their
availability to the device. Access the Site Survey page from the System Settings page.
Joining a wireless network
1.
Select Protected Settings in the Setup Menu.
2. Select System Settings in the Protected Settings Menu.
3. Press the Site Survey button to open the Wireless Networks page. The available networks are listed
below. Use the up and down arrows to navigate the menu, or use other options for sorting:
Pushing the PAN ID header sorts the available networks by PAN ID in alphabetical order;
pressing the header again will reverse the sorting.
Pushing the Channel header sorts by channel; pressing it again will reverse the sorting.
4. Select the network by pushing it on the touch screen. A pop-up page reading "Do you wish to
connect to PAN [PAN number]" will appear.
To connect to the PAN, press the Yes button.
To return to the Site Survey page without connecting to the PAN, press the No button.
If you do not make a selection within three seconds, the pop-up page will automatically close
in three seconds.
5. Select the Back button until you return to the Setup Menu.
FIG. 19 Site Survey Page
Site Survey
PAN ID The Personal Area Network ID.
Join The availability of the network. Yes indicates that it is open to join.
Stack Profile The Stack Profile indicates the capabilities of that wireless network.
Channel The current channel of the PAN.