7
1.4 Setting Up the DVR Unit
1.4.1 Installing Hard Drives
Before you install hard drives, please adjust the jumpers’ setting according to the
instructions on your hard disk label.
The DVR unit allows you to install up to
two hard drives (a master and slave
drive).
Install one hard disk in a removable
hard disk drawer as HDD A and the
other hard disk inside DVR unit as
HDD B. Fix the hard disks as the right
picture shows.
The minimum hard disks capacity should be 40GB/ 7200RPM.
When you only install ONE hard disk in your DVR, Western Digital (WD),
Hitachi and Seagate hard disks are recommended. When you install 2 hard
disks, please use 2 WD or 2 Hitachi hard disks inside the DVR. A hard disk
compatibility issue may occur due to different hard disk models.
For more information of the recommended hard disk list, please go to
http://www.avermedia.com/nvd/hardware-recom.htm