21
SUB MENU
> PASSWORD CHANGE
TIME SET
VGA SETUP
MOTION SETUP
PASSWORD SETUP NO
PRESS (< , >), THEN(SELECT)
PRESS (MENU) TO EXIT
3.7.1 PASSWORD CHANGE
To change the password:
1. Input the prompted information:
CURRENT PASSWORD : - - -- --
NEW PASSWORD : - -- -- -
CONFIRM PASSWORD : ------
The factory default password is "111111". Use the following front panel buttons
to input a numeric password:
For "1"
For "2"
For "3"
For "4"
2. The "Password changed" message is then displayed. This message flashes
three times, and then you will be returned to the SUB MENU.
Note: You will be prompted to enter the password when you attempt to format the
hard drive(s) in the HARD DRIVE SETUP menu.