Filter
Top Products
Using Your Remote
10
Auto Search Method
Please use this method if none of the
Set-Up Code
numbers worked for your
device during the standard set-up procedure or if the manufacturer or brand for
your device was no listed in the
Set-Up Code
Tables.
1.
Turn on the device you would like the remote control to operate, either
manually or with your original remote control.
2.
Press the corresponding
Device Button
(B&K, CD, DVD, TAPE, SAT,
TV, V1, or V2) and the
MUTE
button, simultaneously.
SET
will appear
in the LCD.
3.
Point the remote control toward the device and press the
CHANNEL UP
button on the remote control. Each button press sends the signal for one
Set-Up Code
number. Keeping the
CHANNEL UP
button pressed
produces a quick scanning of the
Set-Up Code
numbers.
Release the
CHANNEL UP
button as soon as the device turns off.
Please confirm that you have the correct code by pressing the
MUTE
button on the remote control. You should be able to turn your device on
and off with this button.
If you pass the correct Set-Up Code number, you can return to it by
pressing the CHANNEL DOWN button, one Set-Up Code number at a
time, until your device turns back on.
Note:
During programming, the signal for POWER ON and POWER OFF is
located on the MUTE button. For devices that use separate POWER ON and
POWER OFF buttons, pressing the MUTE button on the remote during the
programming will only turn the device off.