Filter
Top Products
Advanced Features
20
After you set-up the remote control to operate your equipment, you
can also program advanced features on the remote control. The
advanced features are designed to enhance the use of the remote
control with your home entertainment system.
A. Punch Through
Volume Control “Punch Through”
You can program the remote control so that either the
AUDIO or TV Volume
Control (VOLUME UP, DOWN, and MUTE)
will also operate in other modes on
the remote control.
Example: Raise, lower and mute the
Volume
of your Audio receiver while the
remote control is in the Satellite mode.
Note:
When this feature is active, the B&K or TV VOLUME and MUTE will
override any existing volume controls in that mode.
To Set-Up
1. Select the mode that you wish to program for
Volume Control “Punch
Through.”
2. Press the corresponding Device and MUTE buttons, simultaneously.
SET will appear in the LCD.
3. Press the VOLUME UP button. PUNCH will appear in the LCD.
4. Press either the B&K Device button to set-up for the
Audio Volume
Control
or the TV Device button to set-up for
TV Volume Control
. B&K
or TV will flash in the LCD, depending on which Device Button was
selected.
B&K or TV Volume Control
will now override the original
VOLUME and
MUTE
functions in this mode.
To Return to the Original Setting
1. Select the mode that you want to turn off the
Volume Control “Punch
Through.”
2. Press the corresponding Device and the MUTE buttons, simultaneously.
SET will appear in the LCD.
3. Press the VOLUME UP button. PUNCH will appear in the LCD.
4. Press the same Device button, again. The Device Mode will flash in the
LCD.
The B&K or TV
Volume Control “ Punch Through”
is now turned off.
The
VOLUME
and
MUTE
of the original device will operate on the
remote control.