Filter
Top Products
Using Your Remote
11
4.
Once the correct code is confirmed, press the
Device Button
to store the
Set-Up Code
number.
PASS
will appear in the LCD.
5.
Test the remote control for your device. Try the
POWER, CHANNEL
UP AND DOWN, VOLUME UP AND DOWN
buttons, etc. If any of the
buttons do not perform as they should, please repeat the set-up from
Step 1 using the next
Set-Up Code
number for your device.
Note:
Some audio and video devices have separate buttons for POWER ON and
POWER OFF. To operate these devices on the remote, press the corresponding
Device Button to turn the equipmen
t ON and press the POWER button to
turn the equipment OFF.
6.
Please repeat the above steps to program the remote control for each of
your other devices.
Recalling the Set-Up Code Number
To display the three-digit
Set-Up Code
number that was stored for a device.
1.
Press the
Device Button
and
MUTE
button, simultaneously.
SET
will
appear in the LCD.
2.
Press the
OFF
button. The LCD will quickly flash the three-digit
Set-Up
Code
number that was stored for your device in that mode.
3.
Please write your
Set-Up Code
numbers in the chart below, for future
reference.
Set-Up Code Numbers
B&K
SAT
CD
TV
DVD
V1
Tape
V2