Filter
Top Products
Using Your Remote
16
Erasing All Functions in One Device Mode
1.
Press the Device button for the mode to be erased.
2.
Press and hold the
Device
and
SEL / PLAY
buttons simultaneously, for
approximately three seconds, until the LCD shows
LEARN
.
3.
Press and hold the
Device
and
LIGHT
buttons simultaneously, for
approximately five seconds and then release the buttons. The LCD will
flash
ERASE
and then alternately
CLEAR
and the
Device Mode
.
Note:
This procedure takes about two minutes to complete. When the LCD on the
remote control returns to the
Device Mode
, all the learned functions have in the
selected Device Mode have been erased. All the buttons in that Device Mode will
now operate with the default preprogrammed functions in that mode.
Erasing All Buttons in All Device Modes
1.
Press and hold the
TV Device Button
and the
LIGHT
button
simultaneously, for approximately ten seconds. The LCD will flash
ERASE
ten times, flash
CLEAR
and then return to the TV mode.
When the LCD on the remote control returns to
TV
, all the learned functions
in all eight Device Modes have been erased. All buttons in all Device Modes
will now operate with the default preprogrammed functions in their
respective modes.