Filter
Top Products
Advanced Features
21
Channel Control “Punch Through”
You can program so that either the
SAT
or
V2 Channel Controls (CHANNEL UP
and
DOWN)
will also operate in other modes on the remote control.
Example:
Change
CHANNEL UP
and
DOWN
on your
satellite
while the remote
is in the TV mode.
Note:
When this feature is active, SAT or V2 CHANNEL UP and DOWN will
override any existing channel controls in that mode.
To Set-Up
1.
Select the mode that you wish to program for
Channel Control “Punch
Through.”
2.
Press the corresponding
Device and MUTE
buttons, simultaneously.
SET
will appear in the LCD.
3.
Press the
VOLUME DOWN
button.
PUNCH
will appear in the LCD.
4.
Press either the
SAT
Device
Button to set-up for
SAT Channel Control
(Satellite)
or the
V2 Device Button
to set-up for
V2 Channel Control
(Cable).
Either
SAT
or
V2
will flash in the LCD, depending on the
Device Button
selected.
SAT or V2 Channel Controls will now override the original CHANNEL UP
and DOWN in this mode.
To Return to the Original Setting
1.
Select the mode that you want to turn off the
Channel Control “Punch
Through.”
2.
Press the corresponding
Device
and the
MUTE
button, simultaneously.
SET
will appear in the LCD.
3.
Press the
VOLUME DOWN
button.
PUNCH
will appear in the LCD.
4.
Press the same
Device
button, again. The
Device Mode
will flash in the
LCD.
The
V1 (VCR)
or
V2 (cable) Channel Control “Punch Through”
is now
turned off. The
CHANNEL UP
and
DOWN
of the original device will now
operate on the remote control.