Filter
Top Products
Using Your Remote
17
D. Operation
After you have programmed the remote control for your equipment, use the
following procedures to operate your home entertainment system:
1.
Press the
Device Button
that you wish to operate: i.e. to operate a TV,
press the
TV device button
: to operate a VCR, press the
V1
Device
Button
, etc.
2.
Aim the remote control at the device and press the
POWER
button to
turn the device on.
3.
Press the buttons that send out the commands you desire.
Note:
Some audio and video devices have separate buttons for POWER ON and
POWER OFF. To operate these devices on the remote, press the corresponding
DEVICE button to turn the equipment ON and press the POWER button to turn
the equipment OFF.
Please try all the functions of this remote control with your equipment. The most
common functions are labeled on the remote. However, some of the secondary
functions might be stored under a button that has a different name from the one on
your original remote control. Please refer to the Function Tables on pages 5 – 7
for
details.
Device Buttons
Pressing a Device button at the top of the remote performs the following
functions:
1. Changes the Device Mode on the AV7.1 remote control.
2. Sends out a Power On command for the Device, if applicable.
3. Sends out a preprogrammed or learned Audio Receiver / Preamplifier
INPUT SELECTION, on a second press of the buttons if applicable.
4. Toggles between Automatic Audio Mode and Device Mode
Note:
Once a device button is pressed, the remote will control that device which
was chosen. In order to regain control of your B&K Receiver / Preamplifier you
must press the B&K device button once. Also, device buttons can learn new
information only in the B&K Mode. Please refer to page 14 for details.