Filter
Top Products
Glossary
29
Cursor Control
Buttons that correspond to the UP, DOWN, LEFT, RIGHT, SELECT, GUIDE,
MENU, and EXIT functions of your audio / video equipment.
Device
Audio or video equipment, i.e. Television, VCR, Cable box, Audio receiver,
Satellite receiver, etc.
Device Button
Any of the eight buttons located at the top of the remote control labeled B&K, CD,
DVD, TAPE, SAT, TV, V1, and V2.
Device Buttons
are used to select modes of
operation and to program the remote control.
Learning
Transfer of a function from a button of an original remote control to a button on
the AV7.1 remote control.
LCD
Liquid Crystal Display window located at the top of the remote control. During
normal operation the LCD indicates the mode. The LCD also indicates the
remote’s programming status.
Macro Buttons
Buttons labeled M1, M2, M3, M4, and POWER. These buttons can be
programmed to store Favorite Channels, Macro Commands, or to “relocate”
functions from one mode to another.
Modes
Modes correspond to
Device Button
selections. Modes are displayed in the LCD as
B&K, CD, DVD, TAPE, SAT, TV, V1, and V2. Modes indicate the type of device
the remote control is currently operating.
Punch Through
Advanced feature that enables you to operate Volume, Channel, or Transport
Control functions of one device while in another device mode.
Example:
Audio Volume Control “
Punch Through”
gives you the ability to raise,
lower, and mute your Audio Receiver volume while operating the remote control
in the TV mode.