Filter
Top Products
Using Your Remote
12
C. Learning Set-Up
The AV7.1 has the ability to learn new functions from your original remote
controls:
• There are 8 pages of learning with each page corresponding to the
8 Device modes on the remote control: B&K, CD, DVD, TAPE,
SAT, TV, V1, or V2.
• All Buttons in all Device modes can learn, except the LIGHT
button.
• The 8 Device buttons at the top of the remote control labeled B&K,
CD, DVD, TAPE, SAT, TV, V1, or V2, can learn only in the Audio
Mode (B&K).
• Learned functions override any existing preprogrammed functions
on the remote control.
• Learned functions are automatically erased when a new function is
learned on the same button.
• Learned functions are retained even after a different three-digit
code number is programmed into the remote control.
• To erase a learned function and return to an original
preprogrammed function, please refer to the section Erasing
Learned Functions on page 15.
Learning New Functions on the Main Keypad
1.
Select the mode in which you wish to learn the new function by pressing
the corresponding
Device Button
.
2.
Place the AV7.1 and the original remote to be learned from, on a flat
level surface. Line up the remote controls head to head, approximately 2
to 3 inches apart.