Filter
Top Products
Advanced Features
22
Transport Control “Punch Through”
You can set-up your remote control so that
V1
or
CD
Transport
Controls
(
PLAY
,
STOP
,
FAST
FORWARD
,
REWIND
,
PAUSE
, and
RECORD
) will also operate in
other modes on the remote.
Example:
Control V1 functions while
operating the remote control in the
TV
mode.
Note:
When this feature is active, the V1 or CD functions (PLAY, STOP, FAST
FORWARD, REWIND, and RECORD) will override any existing functions pre-
assigned to these buttons in that mode.
To Set-Up
1.
Select the
Device Mode
into which you want to program
Transport
Control “Punch Through.”
2.
Press the corresponding
Device
and
MUTE
buttons, simultaneously.
SET
will appear in the LCD.
3.
Press the
SELECT / PLAY
button.
PUNCH
will appear in the LCD.
4.
Press either the
V1 Device Button
to set-up for
V1 Transport Control
or the CD Device Button
to set-up for
CD Transport Control.
V1
or
CD
will flash in the LCD, depending on the
Device Button
selected.
The V1 or CD Transport Controls (PLAY, STOP, FAST FORWARD, REWIND,
PAUSE, and RECORD) will now override the original functions of the buttons
in this mode.
To Return to the Original Setting
1.
Select the
Device Mode
that you want to turn off
Transport Control
“Punch Through.”
2.
Press the corresponding
Device and the MUTE
button, simultaneously.
SET
will appear in the LCD.
3.
Press the
SELECT / PLAY
button.
PUNCH
will appear in the LCD.
4.
Press the
Device Button
again. The
Device Mode
will flash in the LCD.
The V1 or CD Transport Control “Punch Through” feature is now turned
off. The original functions assigned to these buttons are restored.