Filter
Top Products
Advanced Features
25
Example – Memory Button Programming
To program
Macro Button M2
in the B&K mode to send the following commands:
turn on the Audio Receiver, turn on the TV, turn on a VCR, and turn on a Satellite
Receiver.
1.
Press the
B&K Device
and the
MUTE
button, simultaneously.
SET
will
appear in the LCD.
2.
Press
Macro Button M2
.
M2__# #
will appear in the LCD.
3.
Press the
MUTE
button (to turn on the Audio Receiver)
M2__01
will appear in the LCD.
Press the
TV Device Button
(to change to the TV mode)
M2__02
will appear in the LCD.
Press the
MUTE
button (to turn on the TV)
M2__03
will appear in the LCD.
Press the
V1 Device Button
(to change to the VCR)
M2__04
will appear in the LCD.
Press the
MUTE
button (to turn on the VCR)
M2__05
will appear in the LCD.
Press the
SAT Device Button
(to change to SAT mode)
M2__06
will appear in the LCD.
Press the
MUTE
button (to turn on the Satellite receiver)
M2__07
will appear in the LCD.
4.
Press the
CHANNEL UP
button.
SAVE
will flash in the LCD, and the
remote control will return turn to the B&K mode.
Erasing Macro Buttons
1.
Select the Device mode / Section in which you want to erase the
Macro
Button.
2.
Press the corresponding
Device
and
MUTE
buttons, simultaneously.
SET will appear in the LCD.
3.
Press the
Macro Button
to be erased.
M(1-5)__# #
will appear in the
LCD.
4.
Press the
CHANNEL UP
button.
SAVE
will flash in the LCD. The
Macro Button
is now erased.
Note:
Any previously stored commands on a Macro Button
will be erased when
new commands are stored on the same Macro Button.